Malekko Manther Growl - Analog Voice

Malekko

MSRP: $499.00
Was: $499.00
Now: $399.00
(You save $100.00 )
(1 review) Write a Review
SKU:
MalMantherGrowl01
reverb_upc_does_not_apply:
on

MANTHER GROWL is a full featured, Eurorack monophonic synth voice with an analog signal path, and like the Manther Tabletop, it includes a coveted CEM3340 VCO IC chip. The analog filter is based on an SSM2044 chip. Square, Saw and Triangle waveforms have their own individual level controls (manual control as well as CV jack inputs), as well as their own individual outputs. Wavefold control can be set to Tri or ALL (folds all waveforms and external input post-filter). Dial the independent LFO level controls to modulate pitch, pulsewidth and filter cutoff. Also includes manual controls over both VCA and filter ADSR and both the VCA and filter have individual gate inputs. MANTHER GROWL MONOPHONIC SYNTH VOICE FOR EURORACK MANTHER GROWL is a full featured, Eurorack monophonic synth voice with an analog signal path and like the Manther Tabletop, it includes a coveted CEM3340 VCO IC chip. The analog filter is based on an SSM2044 chip. Square, Saw and Triangle waveforms have their own individual level controls (manual control as well as CV jack inputs), as well as their own individual outputs. Wavefold control can be set to Tri or ALL (folds all waveforms and external input post-filter). Dial the independent LFO level controls to modulate pitch, pulsewidth and filter cutoff. Also includes manual controls over both VCA and filter ADSR and both the VCA and filter have individual gate inputs. Create everything from heavy basslines to screaming leads to stomping kicks. Manther growls like no other. Features include: VCA and Filter ADSR envelopes with CV and gate inputs External source input routed to the filter CV inputs for Square, Saw, Triangle levels and waveshape amount CV inputs for filter resonance and frequency 1v/oct input Individual outputs for Square, Saw and Triangle waveforms Individual outputs for the VCA envelope and VCF envelope Output jack, post VCA Invert filter envelope switch 4 LFO shapes (ramp, sine, square and random) LFO ramp to saw switch Level controls for LFO over Pitch, PW and Filter cutoff Pitch range switch and knob for fine tuning Direct LFO output 26hp Power specs: 300mA on +12V and 200mA on -12V Weight 1.03 lbs Dimensions 6.5 × 4.25 × 3.25 in

1 Review Hide Reviews Show Reviews

  • 5
    MALEKKO MANTHER GROWL

    Posted by Nathan Sniffen on Feb 2nd 2023

    Nice synth voice. Filled an 26hp void in my life. Very intuitive, and only took a couple minutes of patching to dial in a nice solid “Donk” right away. Has the genuine Curtis CEM3340 VCO Rev.G chip in it and tracks super accurately. I’ve had a couple oscillators with knock-off chips and they drifted worse than Jack Kerouac. This one’s a keeper.