KiwiTechnics Patch Editor Programmer with Power Supply, Brand New!
Kiwi Technics Patch Editor
AC Adapter included
The Patch Editor has been designed for easy parameter editing for many of the older keyboards with easy to use controls for every synth type. Every active control will light up to make fast changes simple and buttons are colour coded depending which state is active. Each control that is changed will clearly identify itself on the display.
There was a stage when most of the keyboards manufactures went though a process of removing all the knobs and replacing them with a parameter driven system. Anyone who has used one will know how difficult it is to use, especially live. When the complaints started arriving some started making plug in patch editors. The problem with these is they only worked on one type of keyboard and were (and still are) expensive and rare. The 'Patch Editor' can be used in place of a PG-300 or MPG-80 as well as handle midi control of midi and sysex capable keyboards. It includes an internet update system for software changes or new keyboards support, and includes an external input that can be mapped to any continuous control and all the active controls light up to make it easy to use.
Each control in each synth is kept in lookup tables. This approach has made the Patch Editor very versatile and flexible.
Some of the features are:
•Can translate midiCC to the currently selected patch. This will allow any synth to be controlled via midiCC for software that does not support sysex. One midiCC command for filter cutoff adjust, for instance, will output the correct codes for filter cutoff adjust for any selected synth.
•Can control both the Upper & Lower Tone boards in the MKS-70 & MKS-80 from the Patch Editor directly separately or combined. Note, the MKS-70 needs the latest system ROM (v1.08).
•Every control identifies itself and it's value on the display in real time. This is important when unused controls are reassigned as is done in some synth types.
•Each synth type has a separate synth midi channel which is remembered. The Patch Editor also has a midi channel for it's own midiCC control.
•All switch positions are remembered for each synth type.
•The ext input allows control of any one variable parameter from an external voltage source. For example a foot pedal could be used to control the filter cut off much like a waa waa pedal might.
•The control lights can be dimmed to suit current light levels.
•Top quality components have been used throughout. This has added to the price but you get something that will work well when it is supposed to and will last.
Power supply required is 9-12vDC with a minimum of 500mA and the Patch Editor has reverse polarity protection built in. 9vDC @ 500mA is the preferred supply voltage. The plug required for power connection is a DC style 2.5mm ID, 5.5mm OD and 10-14mm shaft length with positive on the inside.
Fender Chroma Polaris
Korg DSS-1, DSM-1, DW-6000
Korg DW-8000/EX-8000, M1
KiwiTechnics Kiwi3P Upgrade
KiwiTechnics KiwiSix Upgrade
Kiwitechnics Kiwi-106 Upgrade
MKS-30 JH Midi Mod
Roland Juno 1, 2, 106, MKS-7, MKS-50, MKS-70, MKS-80
Roland JX-8P, JX-10, JD-990
Oberheim Matrix 6 & 6R, Oberheim Matrix 1000
Organix 3P Midi Upgrade
Sequential Circuits SixTrak, Max
Studio Electronics ATC/X
Waldorf Pulse, Q/Q+ MicroQ, MicroWave I (OS2)
Moog Slim & Little Phatty
MidiCC to Sysex translation