Site Information

 Loading... Please wait...
  • Image 1

Doepfer A-100PMS9 Monster Case 9U

$1,250.00
SKU:
rev-5346291

Out of Stock

Product Description

The monster cases are available even with 6U and 9U. The reason for these additional cases is that the 12U monster cases are a bit difficult to handle by one person only. On top of this it is necessary to have available smaller versions of the monster cases when they are mounted together as shown in the pictures on the left side (because of stability and appearance - with a 6U case as upper element the construction looks not that "intimidating")

The 6U monster case A-100PMS6 are equipped with two power supplies (A-100PSU2) and four bus boards, the 9U version A-100PMS9 with two power supplies (A-100PSU2) and six bus boards 

 

Single version of the 9U/168HP A-100 monster case with 9U/168HP (A-100PMS9):

 

outside dimensions (with front cover, closed state): ~ 90 (length) x 48 (height) x 23 (depth) cm
weight of the case (incl. bus boards, power supplies, with front cover, without modules): ~ 14 kg
outside dimensions of the single case (without front cover):  ~ 90 (length) x 48 (height) x 18 (depth) cm
available 19" width and height:
9 U x 168 HP

 

Quantity of bus boards: 6

 

Maximum Output Current:
with four built-in A-100PSU2 (until about end of 2015): +12V/2400mA, -12V/2400mA

with four built-in A-100PSU3 (since about early 2016): +12V/4000 mA, -12V/2400mA, +5V/8000mA

 

inside usable depth for A-100 modules: approx. 70 mm in the power supply area (bottom right), resp. approx. 100 mm in the remaining area (measured from inner side of the front panel until end of the pc board of the module)
position of the mains inlet: center of the rear panel 

 

A-100PMS9: stock article, usually available shortly

 

Single version of the 6U/168HP A-100 monster case with 6U/168HP (A-100PMS6):

 

outside dimensions (with front cover, closed state): ~ 90 (length) x 35 (height) x 23 (depth) cm
weight of the case (incl. bus boards, power supplies, with front cover, without modules): ~ 10.5 kg
outside dimensions of the case (without front cover):  ~ 90 (length) x 35 (height) x 18 (depth) cm
available 19" width and height:
6 U x 168 HP

 

Quantity of bus boards: 4

 

Maximum Output Current:
with four built-in A-100PSU2 (until about end of 2015): +12V/2400mA, -12V/2400mA

with four built-in A-100PSU3 (since about early 2016): +12V/4000 mA, -12V/2400mA, +5V/8000mA

 

inside usable depth for A-100 modules: approx. 70 mm in the power supply area (bottom right), resp. approx. 100 mm in the remaining area (measured from inner side of the front panel until end of the pc board of the module)
position of the mains inlet: center of the rear panel

 

A-100PMS6: custom made product, about 8 weeks delivery time  + time required for shipping

 

The prices for the A-100 monster cases can be found in the price list in the A-100 section.

 

Mounting of several A-100 monster cases

 

Several monster cases can be mounted together as shown in the picture on the left side. For this purpose we offer two types of connectors:

 

  • A-100MVG: set of two straight connectors with 4 screws and 4 washers
  • A-100MVW: pair of angled connector with 4 screws and 4 washers

 

You find the sets in the price list near the monster cases. The connectors are black coated and mounted by means of hexagon screws and washers. The pictures still show blank prototypes of the connectors with curled screws. The final versions of the connector sets are black coated and the angled version has a fixed angle (no hinge). Due to safety reasons hexagon screws are used instead of kurled screws.

 

The pictures show an assembly that consists of an A-100PMB and two A-100PMS9. The three components have to be fixed at the rear side by screw fittings to obtain stability and avoid overturning. For transportation the screw fittings can be released so that each of the three components can be carried by one person only.

 

These case combinations are recommended:

 

  • A-100PMB / A-100MVG / A-100PMS12 / A-100MVW or A-100MVG / A-100PMS6
  • A-100PMB / A-100MVG / A-100PMS9 / A-100MVW or A-100MVG / A-100PMS6
  • A-100PMB / A-100MVG / A-100PMS6 / A-100MVW or A-100MVG / A-100PMS6

 

Other combinations are possible (e.g. A-100PMB+A-100PMS12+A-100PMS9 or A-100PMB+A-100PMS9+A-100PMS9) but not recommended because of the unsufficient mechanical stability. You may combine cases in other configurations at your own risk.

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category